威尼斯官网

真空耙式干燥机ZPG-50

详细说明:

真空耙式干燥机ZPG-50
Vacuum harrow dryer ZPG-50


一.工作原理及特点work principle and characteristic:
ZPG真空耙式干燥机组主要是采用夹套传导传热使料筒内被干燥的物料在搅拌作用下完成动态干燥。适用于干燥少量的、不耐高温和易于氧化以及热敏性的泥状、膏状、粉状物料,含水率为15%-90%。并可进行溶媒的回收。
ZB vacuum harrow dryer mains apply with jacket conductivity to make the material in the cylinder to realize the dynamic drying by mixing, was suitable for less, pulpous, cream or power material with poor high temperature resistance and easy oxidation, the water content is 15%-90% and can recycle the solvent.
?优点:该设备传热面积大,热效率高,物料受热均匀,干燥速率大,溶媒回收率高,干燥过程在真空下完成,对物料以及操作环境无污染。Advantage: big heat conductivity area and high heat efficiency, the material heat evenly and drying quickly, high recycle rate of the solvent and the drying process is under vacuum and no pollution of material and operating environment.
?缺点:物料分批干燥,属间歇式干燥设备。
Disadvantages:Drying in lot and is batch-type drying.


二、技术参数technical parameter:(ZPG-50型 model)
1、 工作容积working volume:25L
2、 加热面积heat area:0.6m?
3、 搅拌转速mixing speed 28r/min
4、 传动配置功率transmit configuration power:3kw
5、 内筒尺寸internal cylinder dimension:Φ400×500mm
6、 夹套设计压力jacket design pressure:?0.3MPa
7、 桶内压力pressure internal cylinder: -0.1-0.15
8、 与物料接触抛光处理polish treatment for the part touch with material
三、设备构造equipment structure:

ZB-50型真空耙式干燥机由:1、顶盖(包括进料孔、人孔、呼吸孔、安全阀、排气回收孔);2、筒体(包括夹套两端盖);3、搅拌主轴(包括耙杆,耙刀,填料四氟密封);4、传动电机(包括减速机、轴壳轴座、联轴器);5、机架;ZB-50 vacuum harrow dryer is composed of 1. Top cover (inlet hole, safety-hole, blowhole, safety valve and exhaust air recover hole); 2.cylinder (include jacket both ends); 3. Mixing main shaft (harrow shaft, harrow knife, PTFE sealing); 4. Driving motor (include speed reducer, shaft shell and shaft base and coupling); 5. Rack.

 

三、设材质说明与报价equipment material and quotation:
1.主轴main shaft:不锈钢stainless steel 304,Ф89X12机加工成型 machining form
2、耙杆 harrow shaft :不锈钢stainless steel 304,Φ45×8×380 (13支13pcs)
3、耙齿harrow tooth:不锈钢stainless steel304,120X80X12(13块13pcs )
4、内筒internal cylinder:SUS304,δ6×Φ400×500
5、夹套jacket:A3钢steel, δ8×Φ530×500, 
6、传动机组drive control unit:
组件accessories(电机motor 3kw,摆线针轮减速机Cycloid-pin gear speed reducer BXD-30) 
7、 机架rack:A3钢 steel,16#槽钢channel steel, 
8法兰flange :A3钢steel,Φ530×δ16 
9金加工件processing parts:联轴器,轴承座,翻板阀,人孔,等coupling, bearing bracket, flap valve and safety hole, etc.
10、机顶盖top cover: 2片pcs A3钢steel 
11,保温棉及焊材五金类 cotton insulation, welding hardware.


威尼斯官网-[欢迎您]